Plan your drawers, box by box.
Boxie turns your drawer's size into a Gridfinity grid. Draw the boxes you need, shape their insides and get files ready to print, all in your browser, in minutes.
no sign-up, it runs in your browser
Built on Gridfinity, the open 42 mm storage standard.
One grid. Endless setups.
Gridfinity is an open, modular storage system created by Zack Freedman. Every box stands on the same 42 mm grid, so everything fits together. Boxie lets you plan your space before you print a single box.
Modular
Tiny bit trays and long tool boxes share one 42 mm grid, so any box sits next to any other.
Extendable
Add, swap and move boxes as your collection grows. Nothing is glued in, and the grid stays the same.
Made to measure
Start from your drawer's inside size in millimetres. Boxie fits the grid and shows the margins left over.
Open and printable
Gridfinity is an open standard: print on any 3D printer and mix in thousands of community designs.
From empty drawer to perfect fit in four steps
- 1
Choose your drawer size
Measure the inside of your drawer and type in the width and depth in millimetres. Boxie fits the largest 42 mm grid and centres it, so you see the margins straight away.
a tape measure is all you need
- 2
Add boxes on the planner
Pick a Straight or Figure box from the library and drag across the grid. Boxes snap to the cells, L and U shapes included, and anything that overlaps turns red.
changed your mind? Ctrl+Z
- 3
Customize your boxes
Set each box's height, wall thickness and stacking lip, add magnet holes, dividers and scoops, then check the exact shape in 3D and measure it.
every box is built to the Gridfinity spec
- 4
Order or print yourself!
Download a watertight STL for each box, or one zip for the whole drawer, and print it at home. Rather not print? Order the set and we ship it to your door.
slicer-ready, no clean-up
your turn!
Get startedFree to plan. Pay only for extras.
Planning and STL files stay free. Upgrade when you want your layouts everywhere, or skip the printer altogether.
Free
Everything you need to plan and print.
$0forever
- Unlimited drawers and boxes
- Lip, magnets, dividers and scoops
- STL export for every box
- Saved in your browser
Maker
For workshops with lots of drawers.
$4/ month
- Everything in Free
- Cloud sync across your devices
- Share a layout with a link
- 3MF export and label templates
Print service
We print it, you unpack it.
$1.20/ grid cell
- Printed in PLA or PETG
- Magnets fitted on request
- Checked against your layout
- Shipped in 5–7 days
Makers are already planning with Boxie
- boxes generated
- 48,200
- makers
- 6,900
- drawers planned
- 12,300
- STL downloads
- 31,000
Ready to sort out that junk drawer?
Grab a tape measure, open the planner and see your new layout in a few minutes.
Get started